Every furnace call starts with a combustion and carbon monoxide safety check, not just a symptom fix.
Heat exchanger cracks, ignitor failures, and gas valve issues all fall within our scope.
If you're dealing with a pilot light that won't stay lit, an ignitor that clicks but never catches, or a furnace that runs but blows cold air, you already know furnace failures carry a safety dimension — carbon monoxide and gas leaks — that most other HVAC repairs don't, so the diagnostic has to start there.

Waiting rarely saves money and often turns a same-day repair into a longer, more involved job.
AAA Pro HVAC built its furnace repair process around one idea: diagnose first, quote honestly, fix it right.
We're licensed, insured, and staffed with techs who've spent years specifically on furnace repair, not general handyman work with an HVAC certificate bolted on.

Cracked heat exchangers get flagged immediately as a safety issue, not just a repair line item.
We carry manufacturer service manuals for major furnace brands.
No push toward replacement when a repair genuinely solves the problem.
We understand a dead furnace in winter is a pipe-freezing risk, not just a comfort issue.
From the first symptom to the final fix, these are the specific furnace repair services our Union-area crews are equipped for.
Hot surface ignitors crack over time and simply stop glowing — we test resistance rather than replacing on assumption. Techs handling ignitor & pilot light repair carry the specific parts and tools this job calls for, not a generic kit.
Faulty gas valves are treated as a safety-critical repair, prioritized accordingly. This is one of the most requested furnace repair calls we get across Union, MS.
A cracked heat exchanger is a carbon monoxide risk and gets flagged immediately with the furnace shut down if needed. This is one of the most requested furnace repair calls we get across Union, MS.
We test motor amp draw against rated spec before replacement. This is one of the most requested furnace repair calls we get across Union, MS.
Blocked or improperly sloped venting can back-draft combustion gases into the home. This is one of the most requested furnace repair calls we get across Union, MS.
A furnace that won't respond to the thermostat at all sometimes traces to a control board fault rather than the burner assembly. This is one of the most requested furnace repair calls we get across Union, MS.

Gas odor reports get immediate safety instructions before dispatch details.
Techs arrive with combustion analyzers and common ignitor/gas valve stock loaded.
Safety check first — combustion and carbon monoxide — then full mechanical diagnostics.
Heat exchanger findings are documented clearly regardless of outcome.

Furnace kept clicking like it wanted to light and never catching.
Old furnace was blowing cold air even though the blower ran fine.
They found a hairline crack in the heat exchanger I never would've noticed.
Pilot light kept going out every few hours.

A clicking-but-not-lighting pattern is one of the most common furnace complaints we diagnose.
We'll walk you through options including repair versus replacement honestly.
Could be a delayed ignition fault, a failed gas valve, or a limit switch issue — a full diagnostic narrows it down.
Electric resistance furnaces fail differently than gas units, and we diagnose accordingly.
Immediately — leave the area and call, don't attempt to diagnose it yourself.
No-heat calls during freeze warnings are prioritized across Union, MS.

Whether you're in the heart of Union or one of the surrounding communities, dispatch routes the closest available technician.
☎ Call +1-866-805-8548 for Union Service